pikselikuva

Halton Technologies / KSA cyclonic filters

KSA cyclonic filters:
95% efficient in removal of 10 μm particles

• Minimisation of grease deposits in the ducts leading to enhanced hygiene and safety
• Lower maintenance costs thanks to the reduction of the cleaning frequency
• Lower sound pressure level thanks to limited pressure losses
• A must for the use of the Capture Ray™ UV-C technology which must be used after a very efficient mechanical primary filtration


The KSA cyclonic filters are composed of honeycomb profiles, which forces the air to swirl inside the profiles. The centrifugal effect is significant and, above all, continuous – especially in comparison to the action of traditional filters. Particles are thus pushed against the profiles. The collected condensation flows naturally towards the extraction plenum drains.
The KSA filters are 95% efficient in removal of 10 μm particles. They are UL-accredited as flame-resistant and have NSF hygiene and safety approval. Constructed from AISI 304 (1.4301) polished stainless steel.


  KSA cyclonic filter animation
 
Capture Jet™ technology (canopies)
Capture Jet™ technology (ventilated ceilings)
Capture Ray™ technology
KSA cyclonic filters
Water Wash technology
T.A.B.™ measurement technology
Direct access to Halton range of Capture Jet™ canopies


Back | Print page